Search

With plastic dispersions, cement mixtures and mortars can be improved.
The dispersion increases the bending strength of the mixture, improves its workability and is slightly protected against early dehydration.
Suitable for sticky debris, thin mortars.

The advantages of acrylate based resins are that their binding times can be controlled. Thus, it is possible to make a multi-layer flooring up to 24 hours, enabling vehicle traffic to commence as soon as possible.

If a facade or a highlighted surface is created, it is important that vandals and "street artists" do not harm them. Anti-Graffiti coatings allow the paint to be removed easily and efficiently from a tangent coating surface. Their application is simple and long-lasting.

In the case of a dilatation design, if a filling is provided with a flexible sealant, a background filling profile must always be used.
The profile helps to save the filler and to prevent the filler from falling too thick, thus limiting its time to solidify.

If you want to make a terrace fully durable and watertight, flexible, spreadable insulations can help.
Using MAXSEAL FLEX, the exterior waterproofing of terraces, balconies and even cellars can be perfectly done, ensuring a long-term solution against water penetration into the structure.

When meeting the horizontal and vertical surfaces, it is important that the meeting point gaps are perfectly watertight.
The MAXFLEX XJS bend reinforcement tape helps to create a complete insulation system.

To get a good quality concrete surface while preserving the formwork, we need to apply a high quality damper.
BISEAL MRL is an aqueous emulsion that provides an environmentally friendly, adequate separating effect for metal and wood shuttering, as well as increases the lifetime of shutterboards.

Whether it is a bridge, heel, pillar insulation or structural protection and repairs, DRIZORO's products are perfectly suited for maintenance of bridges.

As examples of our PCC mortars, MAXREST, MAXRITE 500, MAXRITE 700 and MAXRITE-S are perfect for repairing and reinforcing structures.

In contrast to rough environmental influences, MAXSEAL FLEX (insulation B4), MAXSHEEN ELASTIC (insulation B3) and MAXURETHANE PRIMER (insulation B5) provide a sure solution.

When it comes to durable protection on a new façade or an old façade, CONCRESEAL PLASTERING is the perfect choice.
Our cement-based façade mortars offer outstanding quality, ensuring a great look at the surfaces.

It may be a task to fill a cavity or reinforce a wall. In such cases, cement-based injection mortars can be discussed.
These products are easily pumpable, high-strength mortars for stabilization, filling and sealing.

Closed-cell polyurethane resins come into contact with water to form a homogeneous porous, flexible foam that provides high resistance to water in concrete structures and masonry.

Today it is no longer an issue, but it is a basic requirement to apply concrete additives in concrete technology. The BISEAL range offers solutions for fluids, waterproofing additives, binders, or other additives for concrete technology.

If you are talking about a spectacular concrete, concrete or just ordinary concrete, it is important that these surfaces be protected against the different environmental impacts.

Whether it is carbon dioxide, UV, water or other effects, the MAXURETHANE 2C polyurethane coating helps to protect the surface in any circumstance.

In the case of cracking, it is important for the injection resin to provide fastening.
Epoxy (dry environments) and polyurethane (wet environments) systems can be used to stop cracks, water splashes can be stopped.

If you want to see a decorative mineral surface on the floor and on the wall at the same time, decor decorators can come to mind.
The decorative concrete slabs are designed to form "living" surfaces with mineral appearance both in the interior and exterior.

Drying plasterings help to overcome moisture vapor or "cold wall" effect.
They can be applied on damp surfaces, indoors or outdoors, underfloor or overhead structures, walls and plinths.

Epoxy resin floors are out of the reach of both performance and appearance.
Different thickness systems are fully able to meet any demand indoors. Due to their wide range of colors and many surface designs, these systems are used in underground garages, clean rooms and halls.

Making a look concrete is one of the toughest construction jobs, and in most cases some repair is needed after the insertion.
The CONCRESEAL range can be used to help you make even more concrete from concrete.

If a structure needs rapid and durable repair, DRIZORO PCC mortars are the solution.

These mortars have a pot life of very short, so they can be subjected to several layers of thick patches in a short time.

Plastic fibers can help with shrinkage due to early shrinkage.
BISEAL FIBER is a fine polypropylene fiber that is easily and knotted in the blend. It is characterized by low water absorption, which is an important property to keep the V / C.

In case of building structures subjected to movement or vibration, it is important that the injection material is flexible so as to avoid breakage of the material after the stipulation.
Polyurethane flexible injectable foams meet these criteria, ensuring the success and durability of injection.

If we are to cover a surface that can move or vibrate, we need to choose a flexible covering mortar.
MAXKOLA FLEX is a special flexible tile adhesive mortar with outstanding properties and bridging surfaces that may be subject to mild movement and vibration.

In many cases spraying mortars are used. For machine bases, crane bases, and roof cladding repairs, it is important to use a shrinkage-compensated and heavy-duty mortar to achieve the right result.

One of the most important things in roofing insulation is root resistance.
DRIZORO's green roof system forms a uniform coating that provides root-proof and durable insulation in all conditions.

The grocers marketed by DRIZORO are known for their high performance.
Whether it's narrow or thin joints, vibrating surfaces, mushroom and mold protection, the MAXJOINT FLEX range meets the challenges.

If you have a gypsum decorative element related to a monument protection or any other project, DRIZORO can help you with the construction.
The MAXFIX-Y adhesive is perfect for such requirements, ensuring the perfect fixing of decorative elements on both horizontal and vertical surfaces.

If a plinth wetters, there is a salt blur on it, it drops plaster, then it is most likely that we are approaching moisture. Such phenomena can be safely eliminated by injection.
This helps the DRIZORO silane 6 siloxane-based injection resin to provide a safe protection against capillary moisture.

If you want to protect a natural surface or façade from external environmental impacts, impregnation may be the right solution.
This surface protection forms a colorless primer layer on the surface, increasing its resilience.
Different impregnating materials can be applied to different surfaces and different effects.

Occasionally, the coating surfaces are filled with impurities and residues of oil, which can form a separating layer.

If these are to be removed, special cleaning agents should be used.

MAXCLEAN can help us in such cases.

It often happens that floor leveling or surface-level accuracy is inappropriate.
In such cases, the MAXLEXEL product family can help. These floor dampers can be easily applied to different thicknesses. They are durable, even as final surfaces.

Often, the floor is not suitable for covering because it is uneven, not flat. With MAXLEVEL Flooring Equipments, a 100% clad surface can be formed, ranging from mm to thicker than several cm.

In the case of monumental façades, the façade is repaired by non-cement-based repair material. In such cases, the lime-based façade mortar can be used to completely restore the façade appearance.

Lithium water glasses can be used to repair old or poor quality flooring.
In addition to its powder coating properties, water glass improves the adhesion strength and abrasion resistance of the floor, thus providing significant improvement over problematic surfaces.

In many cases, the role of a structure changes, it needs more power.
In such cases the carbon fiber reinforcement may come into question.
The carbon fabric, which is reinforced in multiple directions, increases the compression and tensile strength of the structure. The load capacity of the structure increases.
 

For filling narrow dilations, MS polymer is the most suitable. These materials have high elongation and durability.

The MAXFLEX range offers a complete solution for such cases.

In many cases, there is no need for fast bonding in case of concrete repair. If large surfaces need to be repaired, normal or slow bonding mortars may be helpful.
The MAXRITE range can help you to repair large surfaces or repair them hot.

In case of damaged structures where the steel insert is no longer covered by concrete, it is important that the casting stones are passivated!
In such cases, MAXREST PASSIVE passivating fluid can be used, which does not require any preparation on the metal or cement passivation material after the metal has been cleaned.

Elastomeric insulating membranes are known for their ease of use and their high performance.

These insulations are durable and can be applied on countless surfaces. They can be used to create a reliable and uniform roof insulation, whether or not they are suitable for forming a surface.

In many cases, the role of a structure changes, it needs more power.
In such cases the carbon fiber reinforcement may come into question.
If it is a pillar, it can lead to more than one method, but the most common is the use of carbon fiber.
With the aid of the textile, the pressure and tensile strength of the pillar can be increased considerably, thus increasing the loadability of the support structure.

The advantages of polyurethane systems are that, apart from their cracking ability, some of them are UV-resistant and have high chemical resistance properties.
These systems are decorative and can be used both indoors and outdoors.
They are suitable for the protection and coating of underground garages, sewage plants and outdoor enclosures.

When designing a pool, it is important that the waterproofing is durable and resistant.
MAXSEAL FLEX insulating sludge is a flexible mortar to form a completely watertight coating that can be covered after the stipulation.

In some cases, underwater structures or water pressure may cause water to burst on the structure.
Such phenomena need to be remedied quickly. In this case, MAXPLUG fastcement is a help, which can eliminate the phenomenon of water splash within a few seconds.

Surface protection of a single concrete in an industrial hall, parking garage or industrial facility is indispensable. DRIZORO resin coatings are a wide-ranging solution for such situations, whether thick or flexible coatings.

In many cases, background injection, cavity filling and soil reinforcement must be carried out on certain projects.
Polyurethane injection foams meet these criteria, ensuring the success and durability of the injection against water.

One-component elastomeric membranes are known for their ease of use and their high performance.

These insulations are durable and can be applied on countless surfaces. They can be used to create reliable and uniform roof insulation.

It is important that a new construction site or a building where the base is to be insulated to waterproof a material that performs its task safely forms a uniform surface and does not have to be kept from any possible welding errors.

The benefits of spreadable insulations are that they form a flexible and completely uniform surface, allowing tall buildings to withstand long-term environmental impacts.

In many cases, the role of a structure changes, it needs more power.
In such cases the carbon fiber reinforcement may come into question.
If it is a ceiling, several methods can lead to results, but the most common use of carbon fiber tape.
With the tape, the tensile bending strength of the slab can be significantly increased.

For industrial floors, the use of surface hard powders is becoming more common today.
MAXDUR's advantage over competing surface starches is that it comes in plain and corundum finish, and in various colors.
If a high-wear, colored industrial floor is needed, MAXDUR is the solution.

If you want to protect a vertical mineral surface from environmental impacts and strive for decorative appearance, MAXQIUCK thin coating is best suited for this purpose. It can even be used as a stainer under proper conditions.

Swirling tapes help encapsulate different structures to make the structures watertight.
This occurs in most cases in the base plate and wall joints where the swelling ribbons provide the role of sealing in the structure against water.

Elastomeric insulating membranes are known for their ease of use and their high performance.
These insulations are durable and can be applied on countless surfaces. They can be used to create reliable and uniform roof insulation, even for the creation of a vehicle with traffic flow.

High chemical consumption is not a negligible criterion. Many sewage and transfer basins and surfaces have to be resistant to chemical impacts.
In such cases, MAXURETHAN FLEX is used, which is flexible in addition to its high chemical resistance, thus creating a crack as a bridging coating on the surface.

Cement-based, spreadable insulations are the best in the market today. They are durable, UV resistant and easy to use. They are suitable for both negative and positive water pressure, so if you are waterproof, then MAXSEAL!

In many cases, the width of the dilatations may exceed 3 cm. In such cases, MAXJOINT ELASTIC is used to fill the dilatation, which has watertight properties along with its elasticity, so it can be used for insulation of pipe breaks.

Our company represents outstanding quality in protecting both the spreadable seals and wastewater plants' sewage elevators against corrosion.

Whether it's a pool of insulation, base insulation, an acidic or alkaline environment, DRIZORO's products are the right solution to these topics.

Flat roof, sloping roof or green roof insulation is the question? The question will be answered by DRIZORO roof insulation systems.

Our products include a flexible, rollable, sprayable, high performance insulating system, meeting all the demands of the customer site.

DRIZORO's products are extremely high quality for structural concrete repairs, pouring concrete casting passages, casting machines, and decorative surfaces.

These shrink-proof concrete repair products and decorative concrete slabs are a guarantee for high-quality construction.

For facade restoration or facade protection, DRIZORO offers a number of solutions.

Whether it is cement or lime-based façades, flexible paints, impregnating and surface-protecting agents, DRIZORO's products offer solutions to this type of issues.

In many cases, it is possible to confirm the pillars or ceiling structure of an existing building because the building has to provide a new function.

In such cases, a solution to the DRIZORO reinforcement system is the solution that our company provides for its partners in designing.

In industrial halls, public spaces, underground parking garages, food industrial units, cold stores, offices, it is important that the floor is heavy and easy to clean.

Such demands have been conceived by the DRIZORO industrial floor and epoxy or poliurethane systems that provide a high performance and decorative look.

Whether it's wide or narrow, indoor or outdoor joints or dilatations, DRIZORO flexible filling materials will always be a good choice.

In durability, workability and quality, DRIZORO's materials compete in all conditions with competing products.

n today's construction industry, it is no longer an extras when we add an additive to a concrete mix, in fact!

Concrete additives for DRIZORO are suitable for making good mixtures of concrete mixtures in both concrete and precast concrete.

A pool can truly become a pool if it is implemented in a system.

The DRIZORO excipients are perfectly suited to the design of pools with FINA qualification.

Subsequent insulation of an old building or poorly managed waterproof concrete is a very important and indispensable process.

DRIZORO Injection Materials are highly safe systems to help eliminate problems with various wetting.

With the help of our resilient resins, the crack injection can not be an obstacle either.

Subsequent reinforcements in monolithic structures, slabs, pillars

Exposed concrete, corrosion protection, general structural improvement

Epoxy, poliurethane and industrial flooring, floor repair, surface protection, dilatation training

DRIZORO Injection Materials and Recommended Use Amounts

General Product Brochure

Spreads insulation, bending, tiling

Flat roofs, sloping roofs, green roofs, terraces, balconies

Wastewater protection, pool insulation, structural repairs